Creality Falcon2 60W Replacement Cooling Fan Pair
Has a cooling fan failed in your Creality Falcon2 60W laser module? Replace both cooling fans at the same time with this matched replacement fan pair from Geeks At Large.
These Creality Falcon2 60W replacement fans are designed as direct replacements for the original cooling fans installed in the 60W laser module. Each fan uses the correct connector and wire length, eliminating the need to cut wires, splice connectors, solder leads, or modify the laser module. Simply remove the failed or worn original fans, plug in the replacements, and get your Falcon2 60W back to work.
The set includes two cooling fans, allowing you to replace both original fans together rather than replacing one aging fan and leaving the other in service.
Designed for the Creality Falcon2 60W
Our replacement fans meet or exceed the OEM fans in all respects while maintaining the proper fit and electrical connection required by the Falcon2 60W laser module.
Features:
- Set of 2 replacement cooling fans
- Designed for the Creality Falcon2 60W
- Direct replacements for the original laser module cooling fans
- Correct factory-style electrical connectors
- Correct wire length
- No soldering or wire splicing required
- Plug-in installation
- Replace one failed fan or replace both as a matched pair
- Ideal for repair and preventative maintenance
Why Are the Cooling Fans Important?
A high-power diode laser generates substantial heat during operation. The cooling fans move air through the laser module to help remove that heat and maintain an appropriate operating temperature.
A worn, damaged, noisy, slow, or completely failed cooling fan can reduce the module’s ability to dissipate heat. Excessive operating temperatures can affect engraving and cutting consistency and may shorten the service life of heat-sensitive components.
Fan problems can show up as unusual fan noise, intermittent operation, reduced airflow, or a fan that no longer spins at all. Replacing a questionable fan before it completely fails can help prevent unnecessary thermal stress on the laser module.
Because the Falcon2 60W uses a pair of cooling fans, this set provides both replacement fans in one package. If one original fan has already accumulated enough operating time to fail, replacing both while the module is open can also avoid having to repeat the repair if the second original fan subsequently fails.
Straightforward Replacement Without Connector Modification
Generic cooling fans may have the correct physical dimensions but still require connector changes, wiring modifications, or lead extensions before they can be installed.
These fans are supplied specifically for the Creality Falcon2 60W, with the appropriate connectors and wire lengths already installed. There is no need to reuse the connector from your failed fan or modify a generic replacement.
Get your Falcon2 60W cooling system operating properly again with a replacement fan pair that’s ready to plug in and go.
Package Includes:
2 × Creality Falcon2 60W replacement cooling fans
Compatibility:
Creality Falcon2 60W laser module
Reviews
There are no reviews yet.