Intro
FAQ
Collection of questions and answers
Software
Lightburn Files:
lbset – This file is used to set up the machine parameters either after firmware flashing, or, to get to a known working state. It use it, In Lightburn, do
- Edit – Machine Settings – Load from File.
- After loading this file, click the Write button and watch for the message that confirms write was successful
- Close Machine Settings
- Power off Devil1
- Power on Devil1
Last updated: 6/15/22
lbdev – This file is used to set up the Devil1 in Lightburn, as described in the Lightburn Installation video below
Last updated: 10/12/22
Firmware flash files:
Flash utility – Use this to flash the firmware to the Devil1
Flash utility installation guide
Firmware file – This is what the flash utility will use for flashing the Devil1
Last updated: 11/31/21
Installation
Troubleshooting
Problems and steps to resolve