xGantry Conversion Kit
xGantry Conversion Kit

xGantry Conversion Kit

$45.00

Typical Order Processing Time: 3-5 days

International shipping: Please use our Esty shop

 

(4 customer reviews)

27 in stock (can be backordered)

Guaranteed Safe Checkout

xGantry Conversion Kit from Geeks At Large  a turns your spare xTool D1 series gantry into a tumbler making beast!  Similar to our Hybrid2 machine, but reusing all the leftover bits from a 40W upgrade.    In order to keep costs down, the kit comes with all the parts needed to do the conversion except the heavy ones which are cheaper to get from Amazon thanks to their dirt cheap shipping.

What’s in the kit:

  • Box for control board
  • All the hardware that is difficult to get in small quantities (screws, nuts, brackets, knobs, etc)
  • Adapters to mount gantry to moving trolleys

What you supply:

  • xTool D1 series gantry
  • xTool wire harness
  • xTool D1 series control board
  • 2040 extrusions (see product support page for non-affiliate link)
  • 2020 trolleys (see product support page for non-affiliate link)

Quick and painless installation, just follow the instructions on our product support page. 

With the xGantry Conversion Kit, you’ll be up and running on a second machine in no time!

 

 

Additional information

Weight 1.9 lbs
Dimensions 7 × 7 × 6 in

4 reviews for xGantry Conversion Kit

  1. Luis Taveras (verified owner)

    As usual, another great conversion kitfrom Cobey. Very easy to put together and functional.

  2. James Ransom

    The ability to make the most of the 40w upgrade is priceless, now I need another laptop ,unless I can do both on the same one

  3. Jim (verified owner)

    excellent solution for the price – and service was excellent – many thanks

    • Cobey Schmidt

      Thank you! I’m glad that this solution worked well for you!

  4. Lang (verified owner)

    Good design, frustrating assembly.
    Don’t know if something changed recently, but every screw seemed to be a couple mm too short. Couldn’t get the t-nuts threaded more than a quarter turn before sliding into the extrusion, so they kept falling off or stripping out.
    3d printed case for the control box is great! Cool metallic color too. But the provided screws to close the case aren’t long enough to accommodate the included rubber feet and still close the case. I just glued the feet on next to the screws.
    Good use for the leftover parts and it engraves well. Takes up way less space than the stock x tool.

    • Cobey Schmidt

      Hey there! Please get in touch so we can figure out what went wrong with your build. The comments on screw size haven’t come up before and I’d like to check stock.

Add a review

Your email address will not be published. Required fields are marked *