Hybrid2 Production Edition Support

Intro

Hybrid2 Production Edition Mechanics

FAQ

1. Can I used XCS or Laserbox Basic?
   • Sorry, no, no xTool software
2. Will there be a version that is compatible with xTool software?
   • Not very likely, no
3. How do I turn off the red crosshairs?
   • The red switch on the front of Devil1 will turn the light on and off
4. Can I mount my rotary directly to the Hybrid2 so it’s always in the same place?
   • Sure!  It’s the Z axis

Software

lbdev: Needed to set up your machine with Lightburn

lbset: Need to reconfigure you machine back to defaults if needed

Firmware flash files:

Flash utility – (Windows) Use this to flash the firmware to the Devil1.  The installer is in another language (working on it), so just click the highlighted buttons

Flash utility installation guide

Flash utility (Mac) – Use this to flash the firmware to the Devil1

Firmware file – This is what the flash utility will use for flashing the Devil1  (Last updated: 9/23/23)

 

Installation

Assembly & Setup Manual

Troubleshooting

• When I home, the module moves to the right instead of the left and bangs into the stopper
  • Using the directional arrows in Lightburn or on the Devil1 LCD screen, check if left and right movement is correct
    • If no:
      • Do Edit – Machine Settings
      • Go to Outputs section
      • Toggle X Direction Invert option to the opposite of what it is set for
        • If it was True, set to false and vice versa
      • Click the Write button
      • Close Machine Settings window
      • Check the left right movement again
        • If all is good, click the Home button and verify that Hybrid2 now homes correctly 
    • If yes:
      • Do Edit – Machine Settings
      • Go to Outputs section
      • Toggle X Homing direction invert option to the opposite of what it is set for
        • If it was True, set to false and vice versa
      • Click the Write button
      • Close Machine Settings window
      • Check the left right movement again
        • If all is good, click the Home button and verify that Hybrid2 now homes correctly